Jump to content

Recommended Posts

  • Publishers
Posted

3 min read

Sols 4505-4506: Up, up and onto the Devil’s Gate 

A grayscale photograph of the Martian surface from the Curiosity rover
This image was taken by Left Navigation Camera onboard NASA’s Mars rover Curiosity on Sol 4503 (2025-04-07 00:33:50 UTC).
NASA/JPL-Caltech

Written by Catherine O’Connell-Cooper, Planetary Geologist at University of New Brunswick

Earth planning date: Monday, April 7, 2025

Over the weekend, we completed our drive up the steep side of a canyon, up onto “Devil’s Gate,” a small butte which forms part of the ridge along the top of the canyon and now we can see down into the next canyon. It is always true that we are going somewhere no one has been before – that’s the idea of an exploratory mission after all, and everyone kind of gets used to it, we don’t stop to think about it. But today, coming over the top of a hill like this and fully looking for the first time into an area that we have only had glimpses of before, it really brings it home that the mission is doing something extraordinary, something out of this world …. and brings that feeling of awe back into focus. 

We did not pass SRAP (Slip Risk Assessment Process) a couple of times as we climbed up the side of this canyon, meaning that the contact science instruments (APXS and MAHLI) had to stand down for that day’s planning. However, this morning, in addition to a brand new vista, we saw that all six wheels are firmly on the ground and we passed SRAP quickly this morning, which must have been a relief to the rover planner in charge of assessing it today! (no one wants to be the bearer of bad news, day after day!) 

Bedrock here has both flat bedrock and amazing large nodular features, which appear to have “wind tails” caused by winds consistently blowing in the same direction. This is a Touch and Go plan, so APXS and MAHLI are focusing on a single target, the brushed “Coronado” target on the flat bedrock in front of us. ChemCam will use LIBS to investigate the nodular features at “La Cumbre Peak.”  

Near the rover, Mastcam will image some small diagenetic features at “Boulder Oaks” and the LIBS target. The 3×2 (2 rows of 3 images) “La Jolla Valley” mosaic focuses on a very nodular patch, just outside of the workspace reachable by the arm. Further from the rover, the 6×2 mosaic (2 rows of 6 images) “Los Penasquitos” looks at an amazing almost vertical vein. This discontinuous vein stretches for about 6 meters (about 18 feet), with vein fins sticking above the surface at various points, like a series of shark fins breaking the bedrock surface. Much further afield, ChemCam will acquire a long distance image on “Condor Peak,” which appears to have large scale vein networks, known as “boxwork structures” and may be an early example of the boxworks we are hoping to reach in Fall 2025.  

The ENV (Environmental and Atmospheric group) planned a Mastcam “tau” measurement, to look at dust in the atmosphere. There is a paired Navcam activity, looking at dust devils towards the north of the crater on the first sol and towards the south on the second sol. A suprahorizon movie and our usual DAN and REMS measurements round out this plan.  

Let’s see what the next drive will reveal to us! 

View the full article

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NASA
      1 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      ECF 2024 Quadchart McGuirk.pdf
      Christopher McGuirk
      Colorado School of Mines
      This project will investigate and develop improved storage methods for the fuels needed to generate electrical power in places where sunlight is not available. The effort will focus on particularly tailored materials called Metal Oxide Frameworks, or MOFs, that can be used to store methane and oxygen. The methane and oxygen can be reacted in a solid oxide fuel cell to generate electricity, and storing them in a MOF could potentially result in significant mass and cost savings over traditional storage tanks which also require active pressure and thermal regulation. The team will use a number of computational and experimental tools to develop a MOF structure suitable for this application.
      Back to ECF 2024 Full List
      Share
      Details
      Last Updated Apr 18, 2025 EditorLoura Hall Related Terms
      Early Career Faculty (ECF) Space Technology Research Grants View the full article
    • By NASA
      1 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      ECF 2024 Quadchart Beik.pdf
      Omid Beik
      Colorado School of Mines
      This project will design a power management and distribution (PMAD) system that can be coupled with a megawatt-scale nuclear power generation system for nuclear electric propulsion (NEP) that is suitable for a Mars mission. The system will include all needed components including a dual rotor generator and power rectifier. The overall design will be optimized and validated with a smaller-scale (10kW) experiment that will be built and tested in the laboratory.
      Back to ECF 2024 Full List
      Share
      Details
      Last Updated Apr 18, 2025 EditorLoura Hall Related Terms
      Early Career Faculty (ECF) Space Technology Research Grants View the full article
    • By NASA
      3 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      One of several NASA distributed sensing ground nodes is set up in the foreground while an experimental air taxi aircraft owned by Joby Aviation sits in the background near NASA’s Armstrong Flight Research Center in Edwards, California, on March 12, 2025. NASA is collecting information during this study to help advance future air taxi flights, especially those occurring in cities, to track aircraft moving through traffic corridors and around landing zones.NASA/Genaro Vavuris NASA engineers began using a network of ground sensors in March to collect data from an experimental air taxi to evaluate how to safely integrate such vehicles into airspace above cities – in all kinds of weather.
      Researchers will use the campaign to help improve tools to assist with collision avoidance and landing operations and ensure safe and efficient air taxi operations in various weather conditions.
      For years, NASA has looked at how wind shaped by terrain, including buildings in urban areas, can affect new types of aircraft. The latest test, which is gathering data from a Joby Aviation demonstrator aircraft, looks at another kind of wind – that which is generated by the aircraft themselves.
      Joby flew its air taxi demonstrator over NASA’s ground sensor array near the agency’s Armstrong Flight Research Center in Edwards, California producing air flow data. The Joby aircraft has six rotors that allow for vertical takeoffs and landings, and tilt to provide lift in flight. Researchers focused on the air pushed by the propellers, which rolls into turbulent, circular patterns of wind.
      NASA aeronautical meteorologist Luke Bard adjusts one of several wind lidar (light detection and ranging) sensors near NASA’s Armstrong Flight Research Center in Edwards, California, on March 12, 2025, in preparation to collect data from Joby Aviation’s experimental air taxi aircraft. NASA is collecting information during this study to help advance weather-tolerant air taxi operations for the entire industryNASA/Genaro Vavuris This rolling wind can affect the aircraft’s performance, especially when it’s close to the ground, as well as others flying in the vicinity and people on the ground. Such wind turbulence is difficult to measure, so NASA enhanced its sensors with a new type of lidar – a system that uses lasers to measure precise distances – and that can map out the shapes of wind features.
      “The design of this new type of aircraft, paired with the NASA lidar technology during this study, warrants a better understanding of possible wind and turbulence effects that can influence safe and efficient flights,” said Grady Koch, lead for this research effort, from NASA’s Langley Research Center in Hampton, Virginia.
      Data to Improve Aircraft Tracking
      NASA also set up a second array of ground nodes including radar, cameras, and microphones in the same location as the sensors to provide additional data on the aircraft. These nodes will collect tracking data during routine flights for several months.
      The agency will use the data gathered from these ground nodes to demonstrate the tracking capabilities and functions of its “distributed sensing” technology, which involves embedding multiple sensors in an area where aircraft are operating.
      One of multiple NASA distributed sensing ground nodes is set up in the foreground while an experimental air taxi aircraft owned by Joby Aviation hovers in the background near NASA’s Armstrong Flight Research Center in Edwards, California, on March 12, 2025. NASA is collecting information during this study to help advance future air taxi flights, especially those occurring in cities, to track aircraft moving through traffic corridors and around landing zones.NASA/Genaro Vavuris This technology will be important for future air taxi flights, especially those occurring in cities by tracking aircraft moving through traffic corridors and around landing zones. Distributed sensing has the potential to enhance collision avoidance systems, air traffic management, ground-based landing sensors, and more.
      “Our early work on a distributed network of sensors, and through this study, gives us the opportunity to test new technologies that can someday assist in airspace monitoring and collision avoidance above cities,” said George Gorospe, lead for this effort from NASA’s Ames Research Center in California’s Silicon Valley.
      Using this data from an experimental air taxi aircraft, NASA will further develop the technology needed to help create safer air taxi flights in high-traffic areas. Both of these efforts will benefit the companies working to bring air taxis and drones safely into the airspace.
      The work is led by NASA’s Transformational Tools and Technologies and Convergent Aeronautics Solutions projects under the Transformative Aeronautics Concepts program in support of NASA’s Advanced Air Mobility mission. NASA’s Advanced Air Mobility mission seeks to deliver data to guide the industry’s development of electric air taxis and drones.
      Share
      Details
      Last Updated Apr 17, 2025 EditorDede DiniusContactTeresa Whitingteresa.whiting@nasa.govLocationArmstrong Flight Research Center Related Terms
      Armstrong Flight Research Center Advanced Air Mobility Ames Research Center Convergent Aeronautics Solutions Drones & You Flight Innovation Glenn Research Center Langley Research Center Transformational Tools Technologies Transformative Aeronautics Concepts Program Explore More
      3 min read NASA’s Curiosity Rover May Have Solved Mars’ Missing Carbonate Mystery
      Article 3 hours ago 1 min read Recognizing Employee Excellence 
      Article 8 hours ago 3 min read Testing in the Clouds: NASA Flies to Improve Satellite Data
      Article 23 hours ago Keep Exploring Discover More Topics From NASA
      Armstrong Flight Research Center
      Humans in Space
      Climate Change
      Solar System
      View the full article
    • By NASA
      NASA Astronaut Don Pettit Soyuz MS-26 Re-entry and Landing
    • By NASA
      NASA Astronaut Don Pettit Soyuz MS-26 Space Station Farewells and Hatch Closing
  • Check out these Videos

×
×
  • Create New...